Barricade Wall Sarking

Masons Barricade Wall Sarking is manufactured to the highest industry standards.

Wall installation

Up to R1.1 may be added to the wall system when Barricade Wall Sarking is installed as a pliable building membrane behind brick veneer / other claddings with a drained cavity. Our manufacturing team specialized process bonds together Aluminium Foil to a high-strength reinforcing Polymer Mesh using a flame retardant adhesive. Our reinforcing Polymer mesh in purposely- treated blue to reduce reflective glare problems when Barricade Wall Sarking is installed.

In all applications:

• External cladding should be installed A.S.A.P

• No contact is to be made with wet concrete on mortar

• Store in a dry area,

• Shrinkage of up to 2% can be expected

In Reflective foil laminate applications:

• Use only in accordance with AS/NZ 4200.2 for the “Installation Requirements for Pliable building membranes.

• A minimum of 20mm air space is recommended adjacent to the reflective foil face to achieve maximum insulation values.

Bushfire attack level

Barricade Wall Sarking is suitable for BAL 12,5 to FZ as AS3959, section 3.10, except in exposed installations in fire control rooms or fire-isolated exits, in NCC 2019 Volume 1 specification C1.10,

This product contains Aluminium Foil which conducts electricity. To avoid electrocution, care should be taken to ensure this product or conductive fasteners used to secure this product do not come into contact or in proximity to electrical wiring during installation or use. This product should not be installed in an existing structure in a horizontal orientation, such as a ceiling or sub-floor application, due to electrical wiring on the framing.